Warping Machine – JYW400-APS

Warping Machine – JYW400-APS

0 sold


Spandex Warping Machine (Neatening Machine)

Spandex Warping Machine (Neatening Machine) – JYW400-APS

Optimally and flexibly used in the neatening of various kinds of ammonia-chartered and root-chartered yarn;the nose frame and the back frame of the machine are driven by different horsepower,and the frequency conversion set enables free adjustment of the rubber tension.

Diameter of the applicat beam is below 400mm, diameter of inside hole is 17mm or 20mm, inside length is 255mm

Categories: ,

Various nylon, Faber, cotton thread etc. It is optimally and flexibly used for bending types.


High speed/durable/simple operation/better performance/high efficiency.
Automatic lubrication device and automatic tension feeding system provide effective control on high quality fabric, saving time and labor for the user.
Convertible machine parts supported by various devices to provide a wider range of fabrics.
Reliable and efficient after-sales service.
Whole plant equipment export and technology transfer.

Technical parameter

The application beam diameter is below 400mm, the inner hole diameter is 17mm or 20mm, the inside length is 300mm.

Speed ​​Adjustment: Frequency control 0 ~350 rpm. (Line Speed ​​0~390 m/min)

Adjust Length: Use the counter to adjust any warp length as needed, this measure can reduce warp loss.

Width and Density Adjustment: Adopt 4pcs W-reed; set width and left and right device randomly.

Motor: 2HP / 4P / 380V 3 Phase


Canlı Destek
Canlı Destek
Müşteri temsilcimizle konuşmak için aşağıdaki butona tıklayınız.